Imagine a natural windsor chair. Like these
That is what we started with. Then my friend Katie sanded all the seats down with a 150 grit, make sure you get all the finish off.
This takes many hours, if you want to use an electrical sander a mouse one will probably be your best bet. We sanded first then did we taped all around the part where the spindles meet the seat. Then we started painting the backs and bottoms
of the chair with Zinsser oil based primer. We used a roller and then a wooser
oil paint brush. This is something you should do with gloves (we did not) and
in the right temperature. If its too hot your paint will start to thicken very
quickly and you will get goops all over your chairs.
of the chair with Zinsser oil based primer. We used a roller and then a wooser
oil paint brush. This is something you should do with gloves (we did not) and
in the right temperature. If its too hot your paint will start to thicken very
quickly and you will get goops all over your chairs.
Please Head On Over To Next Page Or Open button and don’t forget to SHARE with your Facebook friends