We had another tree fall in our yard and oops no space for the wood! So, we decide to make a v-shaped DIY cinder block firewood rack. This is one of the easiest, fastest, and cheapest wood racks to assemble for your backyard.
The materials needed are something most of us have already in the garage or shed but if not, it’s still cheap to purchase. About $1.10 for a cinder block at Lowe’s (you’ll need 2) and $3.40 for a 6-foot-long treated 2×4 (you need 4) at Menards. Under $20 total!
Here’s how to make your own DIY firewood holder:
Best firewood ax!
Materials
- Two cinder blocks
- Four 2×4 pieces of treated lumber in whatever length you wish*
Please Head On Over To Next Page Or Open button and don’t forget to SHARE with your Facebook friends
*We decided to go with 6-foot-long 2×4’s but you might go shorter depending on where you are locating it or if you already have some wood on hand.
1. Place the cinder blocks
Decide where you want your setup. It could be near your firepit, under a shelter, or along a fence, which is what we did.
Simply set the two cinder blocks side by side with the 4 holes up. Easy peasy!
2. Insert 2x4s
Insert a pressure-treated 2×4 in each opening of the cinder blocks pointing outward into a “V” shape- it’s that simple!
3. Stack firewood
Stack your wood in the “V” shape. See? I told you: so easy and so fast!
Note: You can easily mix up the big wood and small pieces throughout or left and right side small stuff and big stuff center.
DIY cinder block firewood rack
We actually have several wood piles but decided to put a new one together to show everyone how easy it can be.
What do you think of this DIY cinder block firewood rack hack? Let us know in the comments below.