PAINT Your Bathroom Sink

This is how the sink started (sorry I didn’t close the toilet lid!!) but you can see it was crazy yellow, I don’t know if that’s how it came originally, or if it’s yellowed over almost 20 years of use. First things first you’re going to need to remove the sink plug and either remove the taps or lift them enough to be able to paint underneath. I used an old teeth floss carton which fit perfectly to rest the tap on.

You’re going to need 2 foam brushes, 2 foam rollers, a vapor mask (this stuff smells!) a disposable roller tray, masking tape to tape off edges and of course your epoxy.

Tape off any edges you need to protect and apply your first coat, using the brush to get into places the roller can’t reach. I will tell you, the first coat looks AWFUL. You’re going to panic and stress out that you’ve made a huge mistake and now you’re going to have to just replace the whole unit, but don’t worry. The product builds, don’t try to make the coat thick, it won’t help in the long run we just have to persevere and layer up.

Make sure to put your roller tray inside a plastic bag and wrap your brush and roller in one too so they don’t dry. I found that recommended drying time between coats was off, and it all depends on the air flow, temperature, moisture etc. So I actually left mine for 1 hour before I applied the second coat. If the first layer is tacky then the second coat will just pull it right back off when you roll it.

After the second coat I actually let it dry for a full 24 hours and then lightly sanded it with a super fine grit before I hit it with a 3rd coat. This epoxy is super runny, which means it’s also thin. I can tell you that it is available as a spray paint too, and I have seen a lot of people have success with that but be aware that the spray paint goes EVERYWHERE, so you would need to plastic cover every single inch of the room and yourself. DO NOT GET THIS STUFF IN YOUR HAIR!

3 coats was fine, but I sanded and put a final 4th coat on 24 hours later because I wanted to ensure that this thing is durable enough for guest usage. What I will say is that the spray paint will give you a smoother finish. The canned epoxy dries grainy in texture due to roller use so be aware of that when choosing between spray and roll on. But this cheap hack changed the whole room!