Easy DIY Blanket Ladder

Look how perfect they fit against the floor and wall!

I used walnut stain and only did one coat as I wanted it light.

I laid everything out to where I thought I wanted the rungs. I wanted the bottom one to be bigger so that the last blanket wouldn’t touch the ground. I measured 45cm from the bottom and 35 cm between each rung and marked them on the wood.

I used a thin piece of mdf as a filler so that when I attached my rungs it was centred in the middle of the vertical pieces.

I used wood glue and my brad nail gun to attach each rung making sure they were lined up to the marks I had made before.

And now I have a beautiful, easy, diyed ladder to put my throw blankets.