Turn a Shelving Unit Into a Cupboard!

We sanded the wood planks individually to remove all the splinters and then laid them out ready to put together.

He placed four vertical planks next to each other and then nailed a horizontal plank across the top and across the bottom, securing with two nails per vertical plank. Where the horizontal plank was longer than required he removed the excess wood with a saw.

A plank was placed diagonally from top to bottom and, with a pencil, marked where it touched the horizontal planks.

A clear line marked the angle where the diagonal plank needed to be cut to fit between the top and bottom horizontal planks.

The wood was cut down with a saw on the diagonal planks at the angle which had been marked.

The diagonal plank was nailed into place with two nails going into each vertical plank behind it.

Please Head On Over To Next Page Or Open button and don’t forget to SHARE with your Facebook friends