Home > Just for you > Pool Noodle “Stone” Column > Page 2

Pool Noodle “Stone” Column

On your cement form, measure from one end 5″ and make a mark around the entire circumference of the cement form.
On the opposite end, measure down 3″ and make a mark around the circumference of the cement form.
Lay one cut pool noodle on the form, curving it around.
Draw a line along the edge of the pool noodle. This will give you a starting point when you apply the noodles to the cement form.

pool noodle stone column

Brush each cut side of the pool noodles with contact cement.
Brush the entire cement form with contact cement.
Allow both to dry at least 4 hours.
When they are dry, they will not feel sticky; however, they will stick to each other.

pool noodle stone column

Using the marker line, lay your first noodle along that line on the cement form. It won’t stick immediately so you have time to make adjustments.
Once you are happy with the placement of the first noodle, continue to lay the cut noodles, cut side down, side by side, spiraling around the cement form.
The noodles will be bigger than the form so cut the noodles to fit inside your measurements.

pool noodle stone column

To make the round ends, bend an uncut noodle around the bottom of the cement form. Cut the noodle ends until it fits snuggly around the cement form.

pool noodle stone column

When you have the correct size of the round end, duct tape the ends of the uncut noodle together.
You will need to make three round ends/rings – two using the same size noodles as you used on the column and one larger.

pool noodle stone column

Place the rings onto the ends of the column. One end should have two rings and one end should have one ring.
Outline the circumference of each end ring onto the 12″x12″ wooden pieces.
Apply contact cement inside the circumference marks on the wood.
Apply contact cement onto the bottom of each end ring.
Allow to dry at least 4 hours.

pool noodle stone column

Place the end ring onto the wood pieces. This is your top and bottom.
Apply caulk where each piece of noodle meets the next piece of noodle.
Apply caulk where the round piece of noodle meets the wooden piece.

pool noodle stone column

As you are applying the caulk, wet your finger and smooth out the caulk lines. Continue to caulk the entire column.
Allow to dry.

pool noodle stone column

Apply texture spray onto the column.
Using a cloth, pat the texture spray so it is lying flat against the noodles.
Allow to dry.

pool noodle stone column

Spray entire column with primer.
Allow to dry.

pool noodle stone column

Spray the entire column with “stone” spray paint.
Allow to dry.
If you are using the column outside, apply a sealant.

pool noodle stone column

Use your new “stone” column in your decorating.
The column is very light weight so if you use it outside where it’s windy, you may have to place some type of weight in the bottom before you attach the 12″x12″ wooden piece.