How to Clean Silver, Easily!

For the second step (equally easy), I ripped a piece of aluminum foil off my roll, crumpled it up into a loose ball, and tossed it into my pot as it boiled. You don’t want to crumple it up too tightly, because your silver will have to be touching the aluminum foil for this trick to work. Step 3: Add a Cup of Baking Soda

Once the water came to a rolling boil, I added a cup of baking soda (a tablespoon at a time), and turned the flame lower. I had a lot of silver, so I wanted to water to stay hot for a while, but you could turn the stove off completely if you have less silver to shine. Step 4: Dunk Your Tarnished Silver into the Pot

Now, here’s where the fun starts! I slipped a silver tray into the pot, letting the whole piece slide right in. Because it was big enough and would be touching the foil on its own, I didn’t need to hold onto it. For the smaller pieces, I made sure to place them carefully in the pot or to hold them against the foil. Remember, as long as your silver piece is touching the foil, this trick will work.

For something with a light tarnish, a quick dip is all you’ll need. For a thick coat of tarnish, like my grandmother’s silver tray, you may have to leave it in for a few minutes. If you’re doing a large amount of silver in more than one shift, you may have to add another half a cup of baking soda. Step 5: Wipe Your Silver Dry

When my tray was looking really bright and shiny, I slipped on a heavy glove and removed the tray from the pot. Silver is a great heat conductor, so make sure to use a glove or tongs to retrieve your sparkling pieces. Using a cloth, I buffed off the water, to prevent my newly-shiny silver from getting any water marks.

And here’s the difference! One dunk later and my fingers aren’t even a little bit tired. Look at that crazy shine, all thanks to science!