Bathroom Vanity Updated

Vanity BaseTo start, the bottom half of the vanity was updated with paint and new hardware. The surface was prepped with a little cleaning first and a light sanding of each surface using a sanding block. Then the drawers, door fronts, and vanity base were all painted with 2-3 coats of paint and finished with a coat of polyurethane to seal it and make it more durable. You can find more info about painting cabinetry here in my  DIY Kitchen Cabinet Refacing post! These  satin nickel cup pulls were used to complete the look.

 

 

ShelvingIn order to fill the void on my vanity, I thought a nice built-in shelf would do the trick. The shelf was built from 3/4″ plywood and consisted of two long, equal length sides, a top and a bottom (also equal length and sitting on top of the side edges), and two shelves cut to fit in between the side pieced. All boards were joined using pocket holes and wood glue.

 

 

For the backing, I had some patterned siding board on hand which added a really nice detail in the background. A 1×3 trim board was used for the top trim piece (a little wider to attach the crown molding), and 1×2 boards created the rest of the face frame. I personally like to cut these to fit as I go. If you want more detail about building shelving, you can see more specifics in this post about  Office built ins.

With the shelving now built, I secured it in the space by screwing it into the studs in the walls. Trim and caulk was then added to fill any gaps and crown molding added to the top to finish it off. Then it was painted using the same paint as my bottom base cabinets.

Mirror FrameLastly, framing was added to the builder grade mirror using primed molding trim boards from Home Depot. I didn’t want to remove the mirror clips so I did my best to work around them. The top and bottom long strips were cut first. The corners were cut using my miter saw at a 45° angle. The boards were then attached using gorilla glue (just a little because it expands!) and tape to secure them until they dried. Then the side pieces were cut to fit and attached using the same method.

 

 

I also swapped out the light fixture for a final update! Makes such a huge difference. You can find many videos showing you how to change out light fixtures if you are interested in learning more. I’m definitely not an electrician so I’d rather not go there…

Bathroom Vanity- Updated and Like New!And that is it! The bathroom looks newer and fresher with not a lot of time or money spent. Of course I still want to do other updates in the space (faucets, flooring, etc.), but it looks so much better now with a little paint and shelving to update this bathroom vanity!