Home > Just for you > Create a Stunning Statement Wall for Less Than $5. > Page 2

Create a Stunning Statement Wall for Less Than $5.


You don’t need to do this but, I would recommend either painting your wall with a fresh coat of paint prior to starting or get a small paint match to the wall. That way if you make a mistake you can fix it by simply painting over it.

you might notice that my sketch only has 6 horizontal spaces but my actual wall has 12. This happened because after I drew out the Initial spacing that I planned for, I didn’t like how big the spaces were so I decided to put in extra horizontal lines.

*this is what I love so much about sharpie walls, you don’t have to be scared to stray from your original plan because If you do something you don’t like, you can just paint over it with the color of the wall you are drawing on.

Trending videos

Draw out all your horizontal lines with a pencilI drew out all my lines with a pencil first. In this video you will notice I am using a small piece of wood. I found it to be much easier to cut a small piece of wood to the size of your spacing and mark off of this.

It’s much easier to hold a solid piece of wood Flat against the wall then it is to hold a flimsy tape measure up.

I also chose to use a 4’ level for the horizontal lines, this way you can tell if your line is going to be straight by looking at the bubble on the level.

Mark out for you angled linesaccording to my calculations at the start on my iPad, I knew I needed 15.5” spacing between my angled vertical lines. So, like before, instead of trying to struggle with a tape measure, I cut a piece of MDF at 15.5” and used this as a measuring device.

You can see in the video I’m holding the 15.5” piece up along the horizontal pencil lines and making a mark. When you end with the piece touching the wall, you need to start the next line in at 7.75” since this is Half of 15.5”.


use a straight edge and match each end up to the marks you made on your horizontal lines and press firmly with the sharpie slightly angled upright and draw the line. Continue doing this until all the vertical angled lines are complete.

Draw your horizontal linesOnce you are done all your vertical lines, draw out your horizontal lines with the paint pen.

You can see in the video at the end, I decided to double up some of the vertical angled lines. This wasn’t part of the original plan but last minute I decided to add them and I am happy I did.

Sharpie walls are so easy to do. Don’t be scared to try one. If you mess up just paint over it. If the pattern with the angled lines intimidates you you can try something more simple. That’s what I did my first time in another bathroom of mine.

that Wall I just started with a simple grid pattern and went from there. If you would like to see a time lapse of this wall head to my Instagram page.



Once again, I cannot thank you enough for following along with me. The hardest part about these walls is figuring out the measurements, after that, it’s easy sailing.



if you have any questions please do not hesitate to ask me. and be sure to hit the follow button on here as well as on Instagram



cannot wait for our next DIY together