My #1 Industrial Farmhouse Transformation.
![](/wp-content/uploads/2023/02/My-1-Industrial-Farmhouse-Transformation..jpg)
Trending videos
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/17/6130153/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Stain trim & drill pilot holesBecause I wanted the new wood trim to match the original table stain, I applied a Walnut Gel Stain to the raw wood. Although it wasn’t a perfect match, it will work perfectly for the paint technique I have planned.
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/17/6130154/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Glue and attach wood casing to the drawer front with screwsNow it’s starting to get exciting. I applied a small amount of wood glue to the back of each strip and aligned the wood molding on the drawer front using match sticks as spacers. This was not the most professional spacer, but it’s what I had on hand. Then I used small screws to attach the molding to the drawer front. Once the screws where in place, I used a small amount of wood filler to cover over the screw heads.
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/17/6130156/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Paint the entire piece and sand around the edgesOnce the stain and wood filler had dried completely, I painted the entire piece with two coats of Annie Sloan Chalk Paint in Old White. Using my sanding block, I sanded away paint from the edges for a distressed look. This is the reason I stained the molding stripes to begin with. As a result, you see some of the original stain through the chalk paint.
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/17/6130157/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Wax the surface to sealNext I used Annie Sloan Clear Wax with a mixture of mineral spirits. I made a mayonnaise consistency mixture and used a chip brush to apply to the painted piece.I used a soft cloth to remove any excess wax and allowed the wax to dry. Then I used a piece of scrape drop cloth to buff out the surface.
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/17/6130159/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Oops! The color was to white so I added Dark WaxFinally, I added a coat of dark wax. Since the surface had already been waxed once, this was quick and easy. Just wipe of excess and buff once again. Note: In hindsight, I would have mixed a small amount of the dark wax to the clear originally to achieve this finish.
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/17/6130164/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Add new hardwareFinally, it was time to add the hardware to the front. The front drawer now looks like 5 small drawers. I purchased the drawer pulls and label holders from D. Lawless Hardware. Using some craft paper card stock that I had on hand, I hand lettered the numbers for the label holders. See the transformed silverware box here!
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/17/6130165/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Now the color is a warmer shade of white. Don’t be afraid to make mistakes when attempting a project. This one still turned out to be my one of my favorites. Thank you for stopping by! I hope this will inspire you to look beyond the obvious when searching for the prefect decor piece. Rachel
![my 1 industrial farmhouse transformation](https://cdn-fastly.hometalk.com/media/2020/04/25/6140843/my-1-industrial-farmhouse-transformation.jpg?size=720x845&nocrop=1)
Before and After!