Second process: Add baking soda and dish soap
Make a powerful cleaning mixture using a half cup of water, half a cup of dish soap, two tablespoons of white vinegar, and one and two-thirds cups of baking soda. Stir the mixture using a fork until all the lumps are disappeared.
Take an empty spray bottle and pour the solution into it. Shake the bottle well and spray on the bowl stains. Scrub the stains using a toilet brush. Now flush out the solution as well as stains from your toilet.
2. How to clean toilet bowl stains with Bleach
As it is quite popular, you must be familiar with bleach. It is a powerful cleaning agent. Take a half cup of dry bleach powder and pour it into the toilet bowl. Let it sit for at least two hours. The stains start to disappear within this time. Now just flush away the bleach from the toilet.
On a positive note: You can also use the most effective cleaning product “CLOROX” which contains bleach instead of solid bleach.
3. How to clean toilet bowl stains with Borax Powder
Borax powder is another very powerful cleaning agent. It is available in a hardware store. Before using borax powder, close the water supply to the toilet tank and flush once to empty the bowl. Take a handful of powder and sprinkle on the stain directly. Now take a toilet brush and scrub the stains.
After scrubbing well, let the powder sit on the stains at least for half an hour. Then reconnect the water supply and flush out the powder as well as stains from the toilet. You can repeat the process if needed.
4. How to clean toilet bowl stains with Coke
Coca-cola is not just a popular beverage; this drink’s mild acidity is also useful for cleaning. It can help you to clean your toilet bowl without using any toilet bowl cleaners. If you are looking for a non-toxic cleaning solution, then coke is an ideal choice for you. Try these easy processes to clean toilet bowl stains with coke.
First process: Apply coke directly
Step 1
If you take a standard-sized soda can or bottle, then the measure will be enough. And if you open a bigger container of coke, then measure out a cup or two and pour it into a glass.
Step 2
As coke contains gentle carbonic and phosphoric acid, it works great in cleaning. Pour the coke into the bowl and around the rim. Allow it to flow over the stains. Ensure to give a good coating of coke on all the stains. It is essential to remove stains completely.
Step 3
Take a piece of old rag for the stains high from the bowl’s water level and soak it into the coke. Now apply it to the stains by hand. Another way is, to take a spray bottle and fill it with coke to spray on the spots. If you do not want to get your hands dirty, this option will be great.
Step 4
Let the Coke sit for a few hours. It will be better if you leave it overnight. Now flush the toilet. The loosened stains will be rinsed away in the water. If you found some remaining stains, you can repeat the process.
The second process: Scrub with a brush
Lots of scrubbing can help you to get rid of stubborn stains. A good toilet scrubbing brush can be the best choice for it. If the only flush cannot remove the loose stain, then scrubbing will do it for you.
To get the best results, scrub both before and after using coke. That means, at first, scrubbing the bowl stains with the brush. Now apply the coke following the first process. Let it sit for a few hours. Scrub again with the brush and finally flush all the disgusting stains.
Third process: Add some household cleaners
Though coke can remove many types of stains, sometimes it cannot work alone against some stubborn stains. In this situation, you may need to take help from some other cleaning solutions. You can follow the below-listed tips:
- Make a solution with one part of coke, one part of lemon juice, and two parts of borax. Apply this versatile cleaning agent to the toilet bowl. Let it sit for at least one hour and scrub off all the stains.
- Take a half-gallon of water and add a half cup of vinegar and one-fourth cup of baking soda. Mix them well and apply them to the toilet bowl. Now scrub the stains and wait for one house and flush out. Follow any of the coke treatments as needed.
When Coke will not work?
Though coke is suitable for removing most toilet bowl stains, it does not always work for some rarer stains. Such as it cannot remove oil or grease-based stains. You may need some detergent, dish soap, or vinegar. It also cannot remove dye, ink, or pigment stains.
Another important thing is that coke cannot disinfect your toilet. It cannot correctly clean the toilet germs. You may need to look for some alcohol-based sanitizer or a commercial cleaning solution for killing microorganisms.
5. How to clean toilet bowl stains with Tri-Sodium Phosphate (TSP)
Trisodium phosphate is an inorganic compound that is highly soluble in water. TSP is used for any heavy-duty cleaning, stain removal, and other similar needs.
Take one tablespoon of TSP and add it to one gallon of warm water. Make a solution by mixing them. Take a piece of cloth and soak it in it. Now rub the stain with the cloth and flush out the disgusting stains of the toilet bowl. Repeat the process if needed.
Wrapping up
We hope now you can clean your toilet bowl stains easily by following any of the above-listed processes. Sometimes these toilet stains become quite severe to remove with any one method.
In that case, you can apply any one or more cleaning processes one after another. Share your experiences with us if you follow any of the above-stated processes. Stay clean and germ-free. All the best.
As an Amazon Associate I earn from qualifying purchases.