STEP ONE of this storage/drawer bed …cut the two dressers down to the proper size. I used the top two drawers and the bottom two drawers. I cut all four sections to 19″. I decided on that dimension because the bottom two drawers of the Campaigner dresser measured exactly 19″.
The top two drawers were not exactly 19″ so I had to leave a bit of a “foot” on the bottom to make it the same exact height. Pictured above.
The piece above without a top is the section we left open (without drawers) to accommodate books, blankets and other stuff. We left it open because we have a nightstand on that side of the room which would block the drawers from opening.
STEP TWO After I cut the dressers up, I brought them inside and painted everything using regular latex house paint and a good high bonding primer.
Then I hauled everything to my daughters room to assemble it.
STEP THREE I arranged the dressers to accommodate her full size mattress.
STEP FOUR. I used thin plywood, AKA Luan, AKA flooring underlayment from Home Depot for the top of the dressers to support the mattress. I also secured the dresser pieces together with two screws between each section.
Initially I intended to cover the opening in the middle with a long strip of the same thin plywood from side to side. However, once my daughter saw the space in the middle and immediately slithered in and decided she wanted to keep it open for naps. So she came up with the idea for a barn door to close the space in the middle. Genius!
STEP FIVE. Lastly, I trimmed out the top edge. I cut down thin trim pieces I had leftover from another job and trimmed the outside edge of the plywood to cover the screws and clean up the edge.
STEP SIX The very last step to this storage bed DIY is the tiny barn door. I cover that in a separate post . The barn door was such a genius idea my daughter had, and since I already had the metal flat bar it only cost me about $6 to make it.
My daughter is thrilled with her storage bed and she even has space to spare.
We still have a bunch of other projects planned for this room renovation. I plan to make curtains and a roman shade for her window, make a duvet cover and some pillows for her bed, make a fabric headboard of some kind, and hang some pictures, so stay tuned for those projects. It oughta be a really cute room in the end.