Because contact paper is sticky, there was a bit of left over residue on the counters. I used a de-greaser spray and a metal sponge to remove the left over stickiness.
Note – The directions in the kit does explain NOT to use any chemical such as this. It may have an effect on the paint sticking. Because I had to get the sticky part off I did use this several days prior to painting. I did make sure it was completely off the counter and used warm water before panting.
Step Two – Tape and Remove exisiting caulk
This part was rather fun to pick off and didn’t take much time at all.
This is what the caulk looked like before I removed it. It was cracked and needed to be replaced anyways.
Step Three – Smoothing Out any lines or imperfections on existing counter
I used what I always have on hand. Applied to the area, let dry and sanded down.
Please Head On Over To Next Page Or Open button and don’t forget to SHARE with your Facebook friends